Deck repair
Rotten purlins and soft decking are replaced for a straight, solid roof.
Metal Roofing
Metal Roof Replacement Cresskill, NJ
A Cresskill roofer can tear off an old metal roof, re-cover it with new metal or replace a shingle roof with metal, and help you decide between a tear-off, a re-cover or new panels in just the bad sections. Call (551) 395-0321 to reach a local roofer.
Replacement comes up once rust or wear has spread past what patches and new fasteners can fix. When panels are perforated by rust, the finish is gone and every screw hole has been enlarged by years of movement, repairs stop keeping up. Older roofs made from thin, lightly coated steel tend to reach that point first.
Not every metal roof replacement starts with a tear-off. Stripping the old metal exposes the framing, which matters because fasteners in rotten wood will not hold. Retrofit re-covers add a new metal roof over the old one, attached through to the structure.
Many metal roof replacements are actually shingle roofs getting metal for the first time. Depending on code and deck condition, the old shingles are either removed or covered. Have the age, roof type and leak history ready when you call.
Depending on what the roofer finds, metal roof replacement in Cresskill, NJ can go hand in hand with metal roof installation and metal roof repair.
Need metal roof replacement in Cresskill? Call (551) 395-0321 to talk to a local roofer.
Call nowThe process
The metal roof replacement process
The order of work depends on tear-off or re-cover, but the basics are the same.
Inspect the structure
A full look at the panels, framing and attic shows whether the roof can be re-covered or must come off. The findings shape the replacement plan.
Choose the approach
Tear-off, re-cover or metal over shingles is chosen, along with the new panel system, gauge and finish. The new panels are ordered cut to length.
Tear off
Panels and trim come off section by section and go to a metal recycler. The roof is never left open overnight.
Fix the purlins
Rotten purlins are replaced, loose ones refastened and soft decking cut out and renewed. Sound framing is what keeps the new roof fastened.
Panel the roof
High-temperature underlayment, new trim, panels, closures and flashing go on in order from the eaves up. Snow guards and ventilation are added where needed.
What is included
Parts of a metal reroof
Flashing
New trim and boots at walls and penetrations so the details last as long as the panels.
Tear-off
Failed panels and trim come off so the structure can be inspected.
Retrofit framing
Where suitable, new metal goes over the old roof on sub-framing on larger buildings.
Metal panels
New panels in the chosen profile, gauge and finish is fastened to the manufacturer pattern.
Related service
Metal Roof Panel Replacement Cresskill, NJ
When only a few panels are rusted through or torn, metal roof panel replacement can keep the rest of the roof in service. On exposed fastener roofs, the roofer removes the screws on the damaged panel and the overlapping edges of its neighbors, slides it out and sets a new one in sealant. Standing seam panel swaps are possible but slower, since the seams on both sides have to be opened.
Many Cresskill roofs need only a few panels replaced after a storm or a falling limb. Expect a slight color difference between new and old metal. Too many swaps, and a full reroof is the smarter route.
Related service
Metal Roof Over Shingles Cresskill, NJ
Metal over shingles is a common way to switch to metal without stripping the old roof. Many codes allow it over a single layer of shingles, and the metal usually goes on over new underlayment, a slip sheet or wood battens.
What you give up is a look at the deck. A roofer in Cresskill should check the attic for rot and soft spots before recommending it, and the shingles must lie flat enough for the panels. Any sign of rot, or a second layer of shingles, tips the decision to tear-off.
Local help
Metal Roof Replacement Near Me
In Cresskill, many metal replacements are older galvanized roofs that have finally rusted through. From Cresskill out to neighboring towns such as Demarest, Tenafly, Dumont and Closter, older metal roofs tend to need full replacement once the coating is gone, and newer houses are adding metal as their shingle roofs wear out, which is why the condition of the purlins and deck drives the plan.
For metal roof replacement in Cresskill, NJ or nearby towns like Demarest, Tenafly, Dumont and Closter, call (551) 395-0321 to reach a roofer who covers your street.
How the weather here affects roofs around Cresskill
Winters here are long and cold, with snow on the roof for weeks at a time and plenty of nights below freezing. Heat escaping from the attic melts snow on the upper roof, and the water refreezes at the colder eaves, building ice dams that push water up under the shingles. Strong coastal storms push rain into every weak spot at the flashing and valleys. That is why roof repair in Cresskill is busiest after a hard winter and before the next one.
Why call
Why not wait
Smaller repairs
Small roof problems caught early usually stay small repairs.
Local knowledge
Local roofers see the same roofs and storm damage across Cresskill and nearby towns.
Straight answers
Ask your questions before you agree to anything.
Common questions about metal roof replacement
Can I replace just one damaged metal panel?
Replacing one panel is a routine job on most ribbed and corrugated roofs. The roofer unscrews the panel and its laps, removes it and fastens a matching one in place. Standing seam panels take more work because the seams must be opened.
Can a new metal roof go over the old metal roof?
In a retrofit, new panels go over the old roof on spacers or purlins. It is common on larger buildings where tearing off would disrupt use. An engineer or roofer confirms the framing can carry the added load.
What happens to the old metal roofing?
Removed metal panels are generally recycled. Metal can be melted down and reused, so it rarely goes to the landfill. Your roofer can explain how the old metal will be hauled away.
Is it a good idea to put metal over shingles?
Local code decides whether metal can go over existing shingles. It saves tear-off and disposal, but it hides the deck, so the attic should be checked for rot and soft spots first. Two layers or any rot means the shingles should come off.
How do I know my metal roof is past repair?
Replacement makes sense once the metal itself is failing across many panels. Rust holes in many panels, a finish worn to bare metal and screw holes that will not hold new fasteners all point toward replacement. Call (551) 395-0321 to have a roofer check the roof and the structure.
More questions? Call (551) 395-0321
Often needed together
Metal Roof Installation
Metal roof installation built around the right panel, finish and trim for the house, with high-temperature underlayment and proper flashing.
Learn moreMetal Roof Repair
Repairs for leaking fasteners, open seams, rusted panels and failed flashing on a metal roof, so the panels keep shedding water for years more.
Learn moreRoof Replacement
A complete new roof from the deck up when repairs no longer make sense, with the old layers removed and the deck checked.
Learn moreStanding Seam Metal Roof
Standing seam metal roofing installed, repaired and detailed for thermal movement, for homes, additions and low slope roofs.
Learn more
Looking for something else?
See all roofing servicesNeed metal roof replacement in Cresskill, NJ?
Call (551) 395-0321 to talk to a roofer serving Cresskill, NJ.